CERRAR

1/ 6

WEIZE Batería LiFePO4 de 12 V 100 Ah grupo de baterías de litio 31, BMS integrado de 100 A, batería de ciclo profundo de protección de baja temperatura para motor de arrastre, RV, solar, marina,

WEIZE Batería LiFePO4 de 12 V 100 Ah grupo de baterías de litio 31, BMS integrado de 100 A, batería de ciclo profundo de protección de baja temperatura para motor de arrastre, RV, solar, marina,

Ahorra 89%
$ 558.00 MXN
$ 4,999.00 MXN
Cantidad
Solo quedan 0
Fijación de precio por lote
Cantidad
Precio
1+
$ 558.00 MXNpc

Sobre este artículo

  • ✅ Nuestro servicio: como la marca número 1 de baterías de plomo ácido en Amazon, las baterías de fosfato de hierro y litio de Weize están garantizadas con confianza durante 10 años. Nuestro objetivo es que la calidad sea seguida con un servicio al cliente de calidad, Amazon no se ocupa de la devolución de productos relacionados con la batería, así que ponte en contacto con el vendedor directamente. El equipo de soporte de Weize está en espera para USTED.
  • ✅ Construido para durar: nuestras baterías LiFePO4 de 12 V 100 Ah viven más de 2000 ciclos a 100%/8000 ciclos a 50% (sugerida) profundidad de descarga, sin disminuir en el rendimiento. La vida útil promedio de las baterías de plomo-ácido es de aproximadamente dos años (500 ciclos) con solo un 50% de descarga. Esto básicamente significa que una batería LiFePO4 le durará al menos 5 veces más que una batería de plomo-ácido, lo que en realidad reduce el costo total. Tiene protección contra el frío, lo cual es crítico.
  • ✅ Ligero y versátil: en comparación con las baterías de plomo-ácido, el litio proporciona una mayor densidad de energía y tiene al menos la mitad de la masa, es una actualización perfecta para cualquier batería de ciclo profundo de 12 V, y la mejor opción para muchas aplicaciones como buscadores de peces, pesca en hielo, camping, sistema solar, sistemas de alarma para el hogar, e-Scooters. Carga la batería con un cargador de batería de litio dedicado, y no más de 4 baterías en serie o paralelo.
  • ✅ Seguro y respetuoso con el medio ambiente: hecha de energía 100% segura, no tóxica, no peligrosa, la batería Weize LiFePO4 tiene una mayor estabilidad química, no es propensa a la fuga térmica y no se sobrecalienta ni se incendia incluso si se perfora. Sin ácido en la batería, puede montarse de forma segura en cualquier posición. Pero por favor, lee el manual de usuario cuidadosamente antes de usar, no dudes en llamarnos si tienes alguna pregunta sobre la batería.
  • ✅ La batería WEIZE está diseñada para su uso como un propósito de almacenamiento de energía. No utilices esta batería como una batería de automóvil, batería de arranque o batería de carrito de golf. ¡No sugerimos usarlo para iniciar ningún dispositivo!

TROUBLESHOOTING

  • Can not discharge

1.Check whether the battery is securely connected.

2.Check whether the positive and negative battery terminals are correctly connected.

3.Check whether the battery voltage is greater than 12V. If it is less than 12V, charge the battery first.

4.Check whether the load voltage matches the battery.

5.Check whether the load current is greater than 100A, ensure it is less than 100A.

6.Ensure that the ambient discharge temperature ranges from -15°C to +55°C.

  • Can not charge

1. Check whether the battery is securely connected.

2. Check whether the positive and negative battery terminals are correctly connected.

3. Check the charging voltage matches the battery , the charging parameters are set correctly.

4. Check whether the charging current is greater than 100A and ensure that it is less than 100A.

5. Check whether the battery voltage is less than 9V. If it is less than 9V, use the charger with 0V charging function to charge.

6. Ensure the charging environment temperature ranges from 0°C to +45°C.

7. After the battery is protected by over-discharge, disconnect the load and wait for the battery to recover the voltage before charging, or use the charger with 0V charging function to charge.

  • Battery heats up

1. Check whether the battery is securely connected. The connecting wire should be in contact with the battery terminal. Do not clamp screws to discharge.

2. Check whether the battery cable matches the working current. 6AWG or 4AWG cable is recommended.

3. Check whether the load power exceeds the battery discharge power of 1280 Watt, ensure the load power is lower than the required battery power.

4. Ensure the working temperature is lower than 55 °C.

Información de producto

Especificaciones técnicas